SolidCAM iMachining win against DELCAM at M/s SHAKAMBARI INDUSTRIES
Shakambari Industries is a small Aerospace components manufacturing company.
Trials Conducted by SolidCAM on 02nd FEB 2018
Total number of Settings: 2
Total number of Operations: 5
|Max RPM||Max XY Feed||Spindle Power||Controller||Material UTS|
|3000||6 m / min||5.5 kw||Sinumerik 802D||1000 mpa|
Highlights of the cutting trial:
- Maximum depth of cut achieved on the machine in a single pass: 24 MM.
- Used Tools Diam 12mm, 8mm, & 4mm
- Observed Increased Tool life up to 3 times compared to regular machining
- Average spindle load recorded during full depth cutting: 15 %
Earlier Cycle Time was: 42 min
iMachining Cycle time: 14 min 16 sec