Úspěchy iMachiningu

Greg Burns, Burns Machinery Inc. on SolidCAM & iMachining

 
  Letectví

SolidCAM & iMachining had the quickest return on Investment on anything of significance that I put money into in the last 10 years! What we saved in first month on tool life, paid for the software!

Čtěte více 

iMachining in Inconel 718 with Hoffman tools

 
  Úspěchy iMachiningu u zákazníků

..people from Hoffman were very enthusiastic about the results..

Čtěte více 

Inconel Meets Match in General-Purpose End Mill and iMachining - result was a 500 percent increase in tool life and an 86 percent reduction in cycle time.

 
  Úspěchy iMachiningu u zákazníků

...these improvements were similar to what the company had seen on other applications since implementing iMachining..

Čtěte více 

iMachining cutting Inconel: 96% saving in cutting cycle time & 4 times more in tool life

 
  Úspěchy iMachiningu u zákazníků

original cycle time in Inconel was 1 hour 15 min - after iMachining we got his cycle down to 3 min 15 sec (96% saving!!!)

 

Čtěte více 

Jason Near, Rotary Airlock, LLC, Rock Falls, IL, USA "Every day we don't use SolidCAM iMachining we are losing money!"

 
  Job Shop

"You can quickly recover the entire cost of SolidCAM and iMachining in tooling cost savings alone."

 

Čtěte více 

Rotary Airlock in US uses iMachining to reduce Inconel cutting time from 60 min to 3 min!

 
  Úspěchy iMachiningu u zákazníků

..they went from 60 Minutes down to 3 minutes on their first test...at least twice the tool life

 

Čtěte více 

iMachining success story of cutting Inconel at Kline,Oilfield Equipment, Inc

 
  Úspěchy iMachiningu u zákazníků

... the result was a 500 percent increase in tool life and an 86 percent reduction in cycle time.

Čtěte více