iMachining ušetřil Wuxi Turbine Blade Co. 60% času obrábění


  Elektronika

Technik SolidCAMu použil 2D iMachining a snížil jejich čas hrubování z 30 minut na 12 (60% zrychlení)...

Čtěte více 

Kingdom Flow Control Co. Reports 50% Cycle Time Savings Using iMachining 3D + HSM vs. Competitor CAM …


  Úspěchy iMachiningu u zákazníků

SolidCAM recently visited Kingdom Flow Control Co., LTD., to demonstrate iMachining 3D + HSM. Kingdom was using a competitor CAM that needed 5 hours to process the part.

Čtěte více 

SolidCAM France replaced 2 Competitor CAM seats thanks to Partner/iMachining/Multiblade module


  Letectví

...thanks to iMachining, I got the full attention of the manager and they started to envisage to change their CAM System.

Čtěte více 

Special iMachining Story – great success at Carl Zeiss SMT


  Optika

..now the manager was deeply convinced to change his current CAM software.

Čtěte více 

iMachining 3D + HSM Finish Results - Fantastic!


  Job Shop

Finish achieved was 0.37 Ra Value, which is about half of what was expected!!!

Čtěte více 

SolidCAM with iMachining demolishes Competitor CAM


  Job Shop

..65% cycle time saving.. Phenomenal tool life.. Excellent finish..

Čtěte více 

Major cross upgrade of competitor CAM because of 80% saving in SolidCAM iMachining!!


  Úspěchy iMachiningu u zákazníků

...With the first iMachining cutting attempt, the tool was running very quiet and smooth in a safe process.

Čtěte více 

Important saving in cutting magnesium part with SolidCAM iMachining vs Competitor CAM


  Letectví

Machining time reduced from 25 hrs in Competitor CAM to 16 hrs in SolidCAM iMachining..programming time also reduced by 1 hr

Čtěte více 

Cutting part with iMachining 3D saves cycle time and extends tool life dramatically!


  Úspěchy iMachiningu u zákazníků

....33% saving in cycle time.. ISCAR Tool cut 12 Parts with iMachining 3D toolpath, instead of only 1 Part with Competitor CAM!

Čtěte více