Kontaktujte nás!
Fórum
Webinars

úspěšné příběhy iMachining

Kingdom Flow Control Co. Reports 50% Cycle Time Savings Using iMachining 3D + HSM vs. Competitor CAM …

SolidCAM recently visited Kingdom Flow Control Co., LTD., to demonstrate iMachining 3D + HSM. Kingdom was using a competitor CAM that needed 5 hours to process the part.

 Lisovací formy a formy
Čtěte více
iMachining 3D Reduces Cycle Time for Workpieces in Aluminum by 40% & Stainless Steel by 77%

By using iMachining 3D, Bock and Klingenberg reduced milling times by 40% and 77%.

 Obchod s pracovními příležitostmi
Čtěte více
iMachining 3D Win in Aluminum Part

..They liked very much the processing technology of iMachining 3D. They also liked the ease and speed of programming the part and of course the speed of cutting.

 Obchod s pracovními příležitostmi
Čtěte více
Special iMachining Story – great success at Carl Zeiss SMT

..now the manager was deeply convinced to change his current CAM software.

 Optický
Čtěte více
iMachining 3D + HSM Finish Results - Fantastic!

Finish achieved was 0.37 Ra Value, which is about half of what was expected!!!

 Obchod s pracovními příležitostmi
Čtěte více
iMachining great success on a Mill-turn Okuma Multus machine.. 58% saving on turbine blade.

...I used iMachining 2D &3D and the cutting time at the end was 34 min, down from original 80 min, which is far beyond the end user's expectations (58% saving).

 Energie
Čtěte více
Major saving with iMachining 3D, in both steel and aluminum, in Aircraft Industry

57% cycle time saving in Aluminum part and 76% cycle time in Steel part..

 Letectví a kosmonautika
Čtěte více
iMachining Success at important Aircraft parts company

Show them iMachining live on their machine - cut one big Titanium part - result was really good. They make parts for Civilian & Military Aircraft, Space Rockets..

 Letectví a kosmonautika
Čtěte více
3D iMachining WIN in steel – 81% savings

Reduced cutting time from 146 min to 28 min! They were very impressed by the ease and speed of programming of the part..

 Obchod s pracovními příležitostmi
Čtěte více
The V8 Supercar team Triple Eight Racing praise SolidCAM iMachining

We use the new [SolidCAM®] iMachining® techniques for roughing now – full depth and full flute-contact cutting. I’m a big fan of this. It is a lot quicker and the tools last longer – and it’s easier…

 Automobilový průmysl
Čtěte více
iMachining 3D | Exciting Statement of a SolidCAM iMachining customer!

..cutting now with iMachining-3D complex parts, with deep cutting contour and all kind of Materials.

 Citace zákazníků o společnosti iMachining
Čtěte více
iMachining 2D customer is impressed with iMachining 3D results

The results with iMachining 3D were of course much better than whatever they imagined.

 Stroje
Čtěte více
iMachining 3D live cutting at Thai Vacuum molding customer - 85% saving in steel...

..Workshop owner could not believe his eyes.

 Lisovací formy a formy
Čtěte více
iMachining 3D Success at Micon – 59% saving in steel

Former Milling Time over 24 hours for all 5 Pockets - iMachining 3D time is about 10 hours..

 Vrtání
Čtěte více
iMachining saving in Aluminum reaches 75%

.."It was just amazing - iMachining worked immediately - For all components, we now achieve savings of 65 to 75%.”

 úspěchy iMachiningu u zákazníků
Čtěte více
iMachining 2D & 3D impressive results cutting steel and titanium

“It is incredibly impressive seeing iMachining cutting stainless steel 1.4301 - we would have never thought such results were possible”.

 Stroje
Čtěte více
iMachining 3D saves customer 48% in cycle time in aluminum

...after iMachining 2D increased his profit by 300% when cutting steel!

 Obchod s pracovními příležitostmi
Čtěte více
Výkonnostní test 3D iMachiningu v Cadron Aviation: úspora 56% na času cyklu, hluboké obrábění do hliníku

..pro druhou stranu součásti lze součást upnout jen pomocí vakua. Při iMachiningu nemohl programátor uvěřit, že lze s upnutím pomocí vakua obrábět tuto součást tak velkými rychlostmi.

 Letectví a kosmonautika
Čtěte více
Cutting part with iMachining 3D saves cycle time and extends tool life dramatically!

....33% saving in cycle time.. ISCAR Tool cut 12 Parts with iMachining 3D toolpath, instead of only 1 Part with Competitor CAM!

 Stroje
Čtěte více
A.A. Daniel: Časová úspora 3D iMachiningu ve srovnání s druhým CAM systémem vysokorychlostního obrábění: 57% úspora

.. proces programování v SolidCAMu je mnohem snazší, rychlejší a efektivnější ve srovnání s druhým CAM systémem..z výsledků 3D iMachiningu byli velmi nadšení.

 Letectví a kosmonautika
Čtěte více