Kingdom Flow Control Co. Reports 50% Cycle Time Savings Using iMachining 3D + HSM vs. Competitor CAM …


  Succès iMachining chez les clients

SolidCAM recently visited Kingdom Flow Control Co., LTD., to demonstrate iMachining 3D + HSM. Kingdom was using a competitor CAM that needed 5 hours to process the part.

En savoir plus 

SolidCAM France replaced 2 Competitor CAM seats thanks to Partner/iMachining/Multiblade module


  Aéronautique

...thanks to iMachining, I got the full attention of the manager and they started to envisage to change their CAM System.

En savoir plus 

Special iMachining Story – great success at Carl Zeiss SMT


  Optique

..now the manager was deeply convinced to change his current CAM software.

En savoir plus 

iMachining 3D + HSM Finish Results - Fantastic!


  Atelier d'usinage

Finish achieved was 0.37 Ra Value, which is about half of what was expected!!!

En savoir plus 

SolidCAM with iMachining demolishes Competitor CAM


  Atelier d'usinage

..65% cycle time saving.. Phenomenal tool life.. Excellent finish..

En savoir plus 

Major cross upgrade of competitor CAM because of 80% saving in SolidCAM iMachining!!


  Succès iMachining chez les clients

...With the first iMachining cutting attempt, the tool was running very quiet and smooth in a safe process.

En savoir plus 

Important saving in cutting magnesium part with SolidCAM iMachining vs Competitor CAM


  Aéronautique

Machining time reduced from 25 hrs in Competitor CAM to 16 hrs in SolidCAM iMachining..programming time also reduced by 1 hr

En savoir plus 

Nate Stuart, 034motorsport: "Absolutely loving iMachining, or rather my operator is!"


  Automobile

...he's always impressed how quickly we're chewing new parts thanks to it - it cut our steel times way down, and tool life is way up.. the times are dramatically reduced..

En savoir plus 

Cutting part with iMachining 3D saves cycle time and extends tool life dramatically!


  Succès iMachining chez les clients

....33% saving in cycle time.. ISCAR Tool cut 12 Parts with iMachining 3D toolpath, instead of only 1 Part with Competitor CAM!

En savoir plus