iMachiningサクセスストーリー

iMachining smokes fire out of Competitor CAM software

... manager accepted that it was a mistake in believing his programmer that the Competitor CAM had a similar option and accepted that iMachining is unique.

 お客様でのiMachiningの成功
詳しく見る
iMachining success story at SolidCAM customer - reduce time from 90 min to 8 min only!

..difficult material 1.4828 (X15CrNiSi20-12).. used in devices to inspect exhaust systems ..heat resistant up to 1000 deg..nearly no wear in tool!

 オートモーティブ
詳しく見る
iMachining halves cycle times and makes cutters last 5 times longer for mill-turn

..Jay Dixon realized that the SolidCAM iMachining module could make a big difference to the ease of machining on his Mazak Quick Turn Nexus

 メディカル
詳しく見る
4 AXIS iMACHINING on 4140HT Steel

..the weapon - iMachining Level 8 Turbo!

 お客様でのiMachiningの成功
詳しく見る
iMachining trial on Forged Steel- 80% savings in machining time

...New Prospect facing a challenge to meet production target due to longer machining time

 お客様でのiMachiningの成功
詳しく見る
iMachining at Hermle HQ at Gosheim, Germany

....They were really amazed about the smooth tool path and the cutting speed.

 お客様でのiMachiningの成功
詳しく見る
iMachining with InventorCAM 2012 on HAAS and Spinner - 75% SAVING...

..Material 16MnCr5 and 1.0577 ..Machine Spinner U-620 with Heidenhain Controller and a HAAS VFSS.

 お客様でのiMachiningの成功
詳しく見る
Cooperation with HAAS dealer Arotec

..was by a customer from us and the HAAS dealer Arotec to show iMachining..75% saving with iMachining

 お客様でのiMachiningの成功
詳しく見る
iMachining at Adin - replacing competitor CAM after 52% saving in steel

..material is steel 4140, and they need to supply 600 pieces...plant manager decided to purchase SolidCAM+iMachining

 メディカル
詳しく見る
iMachining Success story - incredible 82% saving!

..on DMC 635..material 1.2311 (40CrMnMo7)

 お客様でのiMachiningの成功
詳しく見る
Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

..first part cutting steel took about 5 min using iMachining, compared to the 2-3 hrs we were spending before to make the same part

 エレクトロニクス
詳しく見る
iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

....Rubber mold (automotive component)...steel EN31

 オートモーティブ
詳しく見る
iMachining vs Competitor CAM - 84% saving by iMachining!

..iMachining time 17 min vs Competitor CAM time of 1 hr 45 min..

 金型
詳しく見る
iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

..task to achieve much longer tool life...iMachining results: 2 min cutting time (50% saving)..12 slots milled per tool - tool like new!

 切削工具メーカーと再販業者
詳しく見る
Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

..milled the same part with a higher iMachining level, and we reduced the machining time to 4 1/2 mins , as opposed to 17 mins

 ジョブショップ
詳しく見る
Galander Medical GmbH on iMachining: "The cost savings are very big"

..a part from customer that took him 7 hours and 30 minutes to manufacture, we did it in iMachining in 2 hours and 50 minutes..iMachining software pays for itself very quickly

 メディカル
詳しく見る
ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

...the cycle times have been reduced by 70% to 80% - sometimes even reduced by 90%

 ジョブショップ
詳しく見る
iMachining 3D - 83% Savings in Roughing against Competitor CAM

... Makino S33 Vertical Milling Machine, Die Steel,Tool : Dia 10 Flat End Mill, Part Size : 150 X 140 X 43 (Cutting Depth 17mm) ...32 min cutting time by iMachining 3D instead of 180 min!

 金型
詳しく見る
World Record in time saving with iMachining - 96% saving against Competitor CAMl!!!

..cut previously by a sub-contractor of a big company in the optical industry in 16 hrs using Competitor CAM..cut with iMachining in 45 min only!

 光学
詳しく見る
iMachining 3D cuts very fast at Galtronics! Saves 75% against Competitor CAM!

SolidCAM China reports 75% time savings with 3D iMachining against Competitor CAM on Makino CNC machine

 エレクトロニクス
詳しく見る