お問い合わせはこちら
フォーラム
ウェビナーズ

iMachiningサクセスストーリー

Using iMachining to cut MDF wood - 12600 RPM @ 1750 IPM!

...a very happy SolidCAM customer who is using iMachining to cut MDF wood

 お客様でのiMachiningの成功
詳しく見る
SolidCAM + iMachining provides best solution as integrated CAM for SolidWorks

...He saw our online video of iMachining and was very enthusiastic.

 オートモーティブ
詳しく見る
iMachining cutting Inconel: 96% saving in cutting cycle time & 4 times more in tool life

original cycle time in Inconel was 1 hour 15 min - after iMachining we got his cycle down to 3 min 15 sec (96% saving!!!)

 金型
詳しく見る
World Record in time saving with iMachining - 96% saving against Competitor CAMl!!!

..cut previously by a sub-contractor of a big company in the optical industry in 16 hrs using Competitor CAM..cut with iMachining in 45 min only!

 光学
詳しく見る
iMachining 3D - 86% Savings in Roughing in Copper against Competitor CAM

...Competitor CAM - Roughing: 23 mins, iMachining 3D - 3 mins

 お客様でのiMachiningの成功
詳しく見る
iMachining 3D - 83% Savings in Roughing against Competitor CAM

... Makino S33 Vertical Milling Machine, Die Steel,Tool : Dia 10 Flat End Mill, Part Size : 150 X 140 X 43 (Cutting Depth 17mm) ...32 min cutting time by iMachining 3D instead of 180 min!

 金型
詳しく見る
iMachining titanium benchmark at SolidCAM customer

We cut titanium and saved the customer 54% for each part (42 min instead of 90 min).They have now to cut 200 such parts.

 お客様でのiMachiningの成功
詳しく見る
Steffen Grafe, Trentzsch & Hillig GBR: "you always have a problem finding the right feed and spin rates, and thanks to the iMachining Wizard, this is no longer a problem"

...through iMachining, we have also won customers, because they have to spend less money for a very good quality, which is of course an advantage for both sides

 iMachiningに関するお客様の声
詳しく見る
ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

...the cycle times have been reduced by 70% to 80% - sometimes even reduced by 90%

 ジョブショップ
詳しく見る
Galander Medical GmbH on iMachining: "The cost savings are very big"

..a part from customer that took him 7 hours and 30 minutes to manufacture, we did it in iMachining in 2 hours and 50 minutes..iMachining software pays for itself very quickly

 メディカル
詳しく見る
Jürgen Kubas - State Technical school in Villingen-Schwenningen: "We use SolidWorks and SolidCAM for over 10 years"

..we can now use iMachining, which we find to be really great technology.

 技術教育におけるiMachining
詳しく見る
Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

..milled the same part with a higher iMachining level, and we reduced the machining time to 4 1/2 mins , as opposed to 17 mins

 ジョブショップ
詳しく見る
iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

..task to achieve much longer tool life...iMachining results: 2 min cutting time (50% saving)..12 slots milled per tool - tool like new!

 切削工具メーカーと再販業者
詳しく見る
iMachining event at ISCAR Germany - about 100 attendees, with 68 of them being ISCAR customers

...iMachining as usual fascinated the attendees and has exceeded all expectations!

 切削工具メーカーと再販業者
詳しく見る
iMachining at Die&Mold Event at Iscar, Sao Paolo

...success was great for both - after the event we showed both that the Iscar tools had low wear and the excellent results of the of mold machining.

 切削工具メーカーと再販業者
詳しく見る
iMachining vs Competitor CAM - 84% saving by iMachining!

..iMachining time 17 min vs Competitor CAM time of 1 hr 45 min..

 金型
詳しく見る
iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

....Rubber mold (automotive component)...steel EN31

 オートモーティブ
詳しく見る
Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

...We have been running an aluminum pocketing job for 15 years. The run time has been 22 minutes. The job now runs in iMachining in 9 minutes...As impressive as the improved run times are the tool…

 機械
詳しく見る
Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

..first part cutting steel took about 5 min using iMachining, compared to the 2-3 hrs we were spending before to make the same part

 エレクトロニクス
詳しく見る
Jason Near, Rotary Airlock, LLC, Rock Falls, IL, USA "Every day we don't use SolidCAM iMachining we are losing money!"

"You can quickly recover the entire cost of SolidCAM and iMachining in tooling cost savings alone."

 ジョブショップ
詳しく見る