úspěšné příběhy iMachining

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

...the cycle times have been reduced by 70% to 80% - sometimes even reduced by 90%

 Obchod s pracovními příležitostmi
Čtěte více
Galander Medical GmbH on iMachining: "The cost savings are very big"

..a part from customer that took him 7 hours and 30 minutes to manufacture, we did it in iMachining in 2 hours and 50 minutes..iMachining software pays for itself very quickly

 Lékařské stránky
Čtěte více
Jürgen Kubas - State Technical school in Villingen-Schwenningen: "We use SolidWorks and SolidCAM for over 10 years"

..we can now use iMachining, which we find to be really great technology.

 iMachining v technickém vzdělávání
Čtěte více
Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

..milled the same part with a higher iMachining level, and we reduced the machining time to 4 1/2 mins , as opposed to 17 mins

 Obchod s pracovními příležitostmi
Čtěte více
iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

..task to achieve much longer tool life...iMachining results: 2 min cutting time (50% saving)..12 slots milled per tool - tool like new!

 Výrobci a prodejci řezných nástrojů
Čtěte více
iMachining event at ISCAR Germany - about 100 attendees, with 68 of them being ISCAR customers

...iMachining as usual fascinated the attendees and has exceeded all expectations!

 Výrobci a prodejci řezných nástrojů
Čtěte více
iMachining at Die&Mold Event at Iscar, Sao Paolo

...success was great for both - after the event we showed both that the Iscar tools had low wear and the excellent results of the of mold machining.

 Výrobci a prodejci řezných nástrojů
Čtěte více
iMachining vs Competitor CAM - 84% saving by iMachining!

..iMachining time 17 min vs Competitor CAM time of 1 hr 45 min..

 Lisovací formy a formy
Čtěte více
iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

....Rubber mold (automotive component)...steel EN31

 Automobilový průmysl
Čtěte více
Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

...We have been running an aluminum pocketing job for 15 years. The run time has been 22 minutes. The job now runs in iMachining in 9 minutes...As impressive as the improved run times are the tool…

 Stroje
Čtěte více
Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

..first part cutting steel took about 5 min using iMachining, compared to the 2-3 hrs we were spending before to make the same part

 Elektronika
Čtěte více
Jason Near, Rotary Airlock, LLC, Rock Falls, IL, USA "Every day we don't use SolidCAM iMachining we are losing money!"

"You can quickly recover the entire cost of SolidCAM and iMachining in tooling cost savings alone."

 Obchod s pracovními příležitostmi
Čtěte více
iMachining with OKK at MEX Kanazawa2012 exhibition

...SolidCAM reseller in Japan, Tactx, has joined with OKK to show the iMachining strategy on OKK machine in this exhibition

 partneři iMachining
Čtěte více
iMachining for Standard Basic Training in China university

...all teachers were surprised that iMachining is so easy to use

 iMachining v technickém vzdělávání
Čtěte více
iMachining Trials at SANDVIK INDIA

..Time reduction with iMachining was almost 50%.

 Výrobci a prodejci řezných nástrojů
Čtěte více
iMachining at Hermle 2012 in-house exhibition, Gosheim, April 18-21

..We had one machine with a big iMachining Part, another machine with mill turn and another also with an iMachining part on it.

 úspěchy iMachiningu u zákazníků
Čtěte více
iMachining at Maini Aerospace - 58% Savings in Aluminum against Competitor CAM

...Competitor CAM - 200 min, iMachining - 84 mins

 Obchod s pracovními příležitostmi
Čtěte více
Rotary Airlock in US uses iMachining to reduce Inconel cutting time from 60 min to 3 min!

..they went from 60 Minutes down to 3 minutes on their first test...at least twice the tool life

 Stroje
Čtěte více
iMachining Success story - incredible 82% saving!

..on DMC 635..material 1.2311 (40CrMnMo7)

 úspěchy iMachiningu u zákazníků
Čtěte více
SolidCAM presents revolutionary iMachining in action and the World Premiere of SolidCAM 2012 at SolidWorks World 2012

..Wherever and whenever the revolutionary iMachining for SolidCAM is shown, the result is always the same – astonishment! "Seeing is believing"

 iMachining v tisku
Čtěte více