úspěšné příběhy iMachining

With Patience, iMachining Eventually Wins!

Golan Industries is a northern plant of Israel Aerospace Industries (IAI). The factory has been producing aviation parts, especially aircraft seats, and has been programming its parts with SolidCAM…

 úspěchy iMachiningu u zákazníků
Čtěte více
iMachining cycle time saving of 80%

Benchmark at Sri Skandha Pvt Ltd - Bangalore

 úspěchy iMachiningu u zákazníků
Čtěte více
SolidCAM iMachining win at M/s SHAKAMBARI INDUSTRIES

Shakambari Industries is a small Aerospace components manufacturing company.

 úspěchy iMachiningu u zákazníků
Čtěte více
iMachining Success at SolidCAM Customer - 78% Cycle Time Savings ...

Trials held at M/s Grace Infrastructure on November 18th, 2017.

 úspěchy iMachiningu u zákazníků
Čtěte více
Time savings with iMachining and the wide variety of CAM modules in SolidCAM helped to meet customer’s production requirements

CAM SYSTEMS, SolidCAM Reseller in Russia, visited Research and Production Company Sistema (http://tversystema.ru), located in Tver’ city (200 km to the north of Moscow).

 úspěchy iMachiningu u zákazníků
Čtěte více
iMachining cycle time saving of 80.6%

TRIALS HELD AT M/s SPHOORTI MACHINE TOOLS PVT LTD

 Obchod s pracovními příležitostmi
Čtěte více
iMachining savings of 60.7%

TRIAL HELD AT M/s BALAJI MACHINE TOOLS ON 21st OCTOBER 2017 ( HYDERABAD)

 Obchod s pracovními příležitostmi
Čtěte více
InventorCAM & iMachining save time and money for a Vacuum and Laboratory Equipment company

...production preparation and programming time have decreased significantly and the scrap rate has been almost eliminated...

 Pravidelné zprávy
Čtěte více
Unimet d.o.o.: "Almost every part here was produced with iMachining!"

… The biggest satisfaction was to see how cutting time was reduced by 63% when using iMachining for large parts...

 Pravidelné zprávy
Čtěte více
SolidCAM and iMachining take part in the manufacture of Škoda Fabia R5

...after only two months, iMachining had returned its investment! The main savings were in machining time, which were cut in half in many cases, compared to standard milling strategies....

 úspěchy iMachiningu u zákazníků
Čtěte více
Efficient CAD/CAM programming for ambitious 5X machining

...The preparation of CAM machining is now extremely simple...because iMachining has the technology assistants which optimally control all machining parameters. In doing so, it includes the material…

 iMachining podle odvětví výroby dílů
Čtěte více
iMachining ušetřil Wuxi Turbine Blade Co. 60% času obrábění

Technik SolidCAMu použil 2D iMachining a snížil jejich čas hrubování z 30 minut na 12 (60% zrychlení)...

 Elektronika
Čtěte více
Úspěch iMachiningu u potencionálního Ruského zákazníka – úspora 75% času obrábění v oceli!

Potom co se podívali, za jak krátkou dobu jsme provedli naprogramování součásti a potom co viděli velké úspory v čase obrábění, byli velmi nadšeni

 Obchod s pracovními příležitostmi
Čtěte více
iMachining savings of 45 seconds made the difference needed for an existing customer to ultimately increase profit margins

...In the one roughing operation the part had, SolidCAM saved 70% in cycle time, which saved 7% of the overall machining time...

 Obchod s pracovními příležitostmi
Čtěte více
Nova Metal Saves 67% in CNC Cutting Time with SolidCAM's iMachining!

SolidCAM visited Nova Metal to demonstrate iMachining 2D on steel.

 Obchod s pracovními příležitostmi
Čtěte více
Kingdom Flow Control Co. Reports 50% Cycle Time Savings Using iMachining 3D + HSM vs. Competitor CAM …

SolidCAM recently visited Kingdom Flow Control Co., LTD., to demonstrate iMachining 3D + HSM. Kingdom was using a competitor CAM that needed 5 hours to process the part.

 Lisovací formy a formy
Čtěte více
Nordwig Werkzeugbau GmbH achieved a reduction in cycle time with iMachining of up to 80%

After evaluating the SolidCAM Trial version, Nordwig Werkzeugbau used iMachining to reduce their cycle times by 80%.

 Obchod s pracovními příležitostmi
Čtěte více
iMachining 3D Reduces Cycle Time for Workpieces in Aluminum by 40% & Stainless Steel by 77%

By using iMachining 3D, Bock and Klingenberg reduced milling times by 40% and 77%.

 Obchod s pracovními příležitostmi
Čtěte více
SolidCAM France replaced 2 Competitor CAM seats thanks to Partner/iMachining/Multiblade module

...thanks to iMachining, I got the full attention of the manager and they started to envisage to change their CAM System.

 Letectví a kosmonautika
Čtěte více
iMachining 3D Win in Aluminum Part

..They liked very much the processing technology of iMachining 3D. They also liked the ease and speed of programming the part and of course the speed of cutting.

 Obchod s pracovními příležitostmi
Čtěte více